Basic Composition Of Office Chair

- Mar 30, 2018 -

1.Casters: General castors, PU wheels (soft materials, suitable for wood flooring, and engine room).


2.Chair legs: The thickness of the iron frame directly affects the service life of the chair. Surface treatment: polishing, painting, paint (surface gloss, not easy to paint stripping), electroplating (wood frame can not be electroplated), plating quality is good, it is not easy to rust.


3.Gas lift: used to adjust the height and rotation of the chair.


4.Mechanism: Hold up the part of the seat and connect it with the gas lift below.Locking and tilt.


5.Seat: consists of plywood, foam, fabric composition. The quality of the plywood is usually not felt by consumers. Foam: renewable cotton, new cotton. 99% of manufacturers are using the two together;fabric: polyester, mesh, leather. Or with Plastic shell. This type of chair is more breathable.


6.Armrests: thickness affect the quality.


7."L" metal support for back & seat connection : chair seat and back are separate, using steel or steel plate connection, steel plate, usually 6mm or 8mm thick. However, steel plates with a width of less than 6cm must be 8mm thick.


8.Backrest: steel frame or plywood frame,made with a combination of mesh, with breathability or leather + foam.


9.Lumbar pillow: reflect the comfort of the chair.


10. Headrest: Express the comfort of the chair.


Related News

Related Products

  • Fabric Task Chair Mid Back
  • Leather Upholstered Reclining Loveseat
  • Mesh Back Task Office Chair Flip Arm
  • Mesh Back Task Office Chair
  • Comfortable Fabric Executive Office Chair
  • High Back Leather Executive Office Chair